Horizontal Directional Drilling
The exit pit of a horizontal directional drilling operation is a particularly hazardous location.
Go to article
FM5X Fluid Management
Make Your Life Easier.
Though oftentimes overlooked, fluid management is a critical part of the full horizontal directional drilling (HDD) process. It is critical in following certain safety regulations, but also to help keep costs down and productivity up. The updated line of Ditch Witch fluid management systems sets the standards for fluid management in the HDD industry. The updated systems incorporate new design features to meet the high-standards for drill productivity, improve drilling fluid flow, increase durability and provide faster mixing cycle times and yield times. The Ditch Witch family of fluid management systems includes the FT5, FM5X, FM13X and FM25X to meet the needs of any small- to mid-sized HDD project.
FM5X
Features and Benefits
The FM5X is powered by a 5-hp Honda® engine and equipped with an optional 300-gallon (757-L), 400-gallon (1,514.1-L) or 500-gallon (1,892.7-L) tank to match the needs of smaller diameter, short-distance utility installations jobs. The unit supports JT10 and some JT20 applications.
A high-performance Flomax® pump delivers 160-gpm (606-L/min) of flow, and operates up to 10 percent more efficiently than previous models – all without additional horsepower.
Flexible pump mounting offers a variety of setup configurations to meet the needs of small-diameter HDD jobs.
A new wet hopper design increases the venturi inlet from 1.25- to 2-inches - a 60 percent larger opening for material flow and superior fluid mixing. And, steep sides incorporated into the design help speed mixing cycles.
An updated, internal venturi design optimizes fluid velocity, increasing overall system productivity.
Designed with a powder-coated finish, the unit is more durable, economical and resistant to chips, rusting or fading.
A narrow-tank design allows the unit to easily be positioned side-by-side with a drill unit on a trailer for easy jobsite transportation and reduced jobsite costs.
FM5X
SUPERIOR SUPPORT
Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service to expert advice, your Ditch Witch dealer has it all for you.
Specifications
DIMENSIONS
| DIMENSIONS | U.S | Metric | |
|---|---|---|---|
| Length | 123 in | 3.1 m | |
| Height | 53 in | 1.3 m | |
| Width | 25.6 in | 650 mm | |
| Weight, empty | 660 lb | 299 kg | |
| Weight, full of water | 3,164 lb | 1435 kg |
POWER
| POWER | |||
|---|---|---|---|
| Engine | Honda GX160 | ||
| Fuel | Gasoline | ||
| Cooling medium | Air | ||
| Number of cylinders | 1 | ||
| Displacement | 9.9 in3 | .16 L | |
| Bore | 2.7 in | 69 mm | |
| Stroke | 1.8 in | 46 mm | |
| Net power rating | 4.8 hp | 3.6 kW |
FLUID CAPACITIES
| FLUID CAPACITIES | |||
|---|---|---|---|
| Fuel tank | 0.95 gal | 3.6 L | |
| Engine oil | 0.63 qt | 0.6 L | |
FLUID MIXING SYSTEM
| FLUID MIXING SYSTEM | |||
|---|---|---|---|
| Drilling fluid/mixing tank capacity | 300/400/500 gal | 757/1514/1893 L | |
| Maximum flow rate to drilling unit | 18 gpm | 68 L/min | |
| Centrifugal Pumps | |||
| Suction port diameter | 2 in | 51 mm | |
| Discharge port diameter | 2 in | 51 mm | |
| Fluid pressure, max | 40 psi | 2.8 bar | |
| Solids addition rate | 50 lb/min | 23 kg/min | |
| Mixing hopper capacity | 1 ft3 | 28 L | |
We’ve made a wide variety of valuable safety information available in one convenient location. Ditch Witch Safe is dedicated to providing the resources you need to operate your equipment safely.
